Guide

How to Check Shutter Count, by Brand

Updated November 22, 2026

Where Sony, Canon, Nikon, and Fujifilm keep a shutter count, how to read it without destroying the file, and what the number cannot tell you.

A shutter count is the closest thing a used camera has to mileage. It is not mileage. Different brands store it in different places, some of them leave electronic frames out, some of them mix electronic frames in, and a video-heavy camera can be worn out with a number that looks gentle. This guide is how to read the count on the bodies in this catalog, and how not to fool yourself with a screenshot.

If you are buying on eBay, pair this with the buying guide. The count is one line on a longer inspection.

What is being counted

A mechanical shutter is a physical curtain. Each actuation is a small amount of wear, which is why manufacturers sometimes publish a durability rating: a number of cycles the mechanism is built to survive, not a cliff where the camera dies. Electronic shutter modes take the picture by switching the sensor, without moving that curtain. Video may not increment the stills counter at all. A camera that spent three years as a streaming camera can have a low shutter count and a tired sensor, a worn HDMI port, and fans or heat that the number will never mention.

So the right question is not “is the count low?” It is “what did this count include, and what else should I look at?”

Why the seller’s screenshot is weak

Any menu photo can be a photo of a different camera, or of a photo of a menu. File names are worse. Canon and others roll through IMG_0001 to IMG_9999 and start again. Frame 2041 is not 2,041 shutter actuations. It is the name of a file.

Websites that “check shutter count” are only as good as the file you give them and the model their decoder knows. A resized JPEG, a WhatsApp forward, an AirDrop through an app that rewrites images, or a file exported from Lightroom has usually lost the maker notes where the count lives. If the tool says zero, or says it does not know the camera, that result means “unknown.” It does not mean the shutter is new.

The file you want is an original JPEG or RAW, copied from the card with a card reader or a plain USB transfer, that nobody opened and re-saved. A picture of a wall is enough, and it has the side benefit of showing you sensor spots. It also contains the camera’s serial number. Do not upload a picture of your house, your child, or a client’s job to a random website. A wall has no privacy problem. ExifTool, on your own computer, does not need a website at all.

ExifTool is free, runs on Windows, Mac, and Linux, and is the tool these instructions assume. The command is the same idea everywhere:

exiftool -a -G1 -s IMAGE.JPG | grep -i count

On Windows, the findstr equivalent of that filter is fine, or you can open the full ExifTool output and look for count, shutter, and image count. If the line is missing, do not invent a zero. Try a RAW file from the same camera, and try a JPEG shot with the mechanical shutter rather than the silent electronic one.

Sony

Sony does not offer a shutter-count item in the normal menus of the Alpha bodies in this guide: the A7 III, the A7 IV, and the A6400. The count is in the maker notes of an original JPEG or ARW. ExifTool prints it as ShutterCount on the bodies it knows. You may see more than one shutter-count field. On a healthy file they usually agree. If they do not, keep the file and do not average them into a story.

Sony’s figure is generally the mechanical shutter, not every silent electronic frame. A seller who shot weddings in silent mode can hand you a low number and a camera that has taken far more pictures than the number suggests. That is not a scam by itself. It is a reason to look at the wear on the body and to ask how the camera was used. An empty ExifTool result is not a zero either. It means this file, this software version, or this mode did not yield a count. Ask for another frame, shot as a JPEG on the mechanical shutter, copied off the card again.

Do not accept a phone photo of a computer screen as the file. You need the file.

Nikon

Nikon is the straightforward one. The D750, the D850, the Z5, and the Z6 II write the count into the maker notes of a JPEG or NEF. ExifTool’s ShutterCount tag is the field. There is no menu item to photograph instead, so a seller who says “Nikon doesn’t show it” is half right: the camera does not show it, and the file still has it.

Read the caveat that ExifTool itself documents. On models that can use an electronic shutter, ShutterCount includes both mechanical and electronic actuations. A Z6 II that lived in silent mode, or a D850 used heavily in silent live view, can show a number that overstates how many times the mechanical curtains moved. If a second tag such as a mechanical count is present, write both numbers down. Do not throw the lower one away because you like it better.

A NEF opened and exported as a new JPEG from an editor will not do. Same rule as Sony: original file, wall optional, privacy intact.

Fujifilm

None of the Fujifilm bodies here — X-T4, X-T3, X-S10, X100V — put a shutter count in the consumer menus. An original JPEG or RAF often carries an ImageCount field that ExifTool can read. Treat it as a clue.

Two limits matter. On the X-Trans IV generation that includes the X-T3, X-T4, and the related bodies of that era, the stored count is known to be exact only below 32,768 frames. Above that, the field cannot hold the true number, and a tool that prints a tidy figure may be printing a wrapped or masked one. Say that out loud before you congratulate yourself on a “low” X-T3. The other limit is firmware. A Fujifilm image count can be disrupted by a firmware update, so a very low number on an older body can mean a careful owner or a recent update. Ask which firmware is installed, and look at the camera. Rubber, screws, and sensor spots do not reset.

The X100V adds a special case that has nothing to do with the count: the shutter is a leaf shutter in the lens, and the lens does not come off. A pretty count does not inspect the leaf shutter or the front element. Those you look at.

Fujifilm has published a durability figure for the X-T4 shutter: 300,000 cycles. That is a rating of the mechanism. It is not a Fujifilm promise that an ImageCount of 40,000 means the camera is 13 percent used, because the field and the rating are not the same instrument.

Canon

Canon is the awkward brand, and the file-number trap is theirs. IMG_4821 is not a shutter count. There is no consumer menu line on the 5D Mark IV, the 6D Mark II, the EOS R6, the EOS R5, or the EOS RP that says “shutter count.”

DSLRs in this guide do not put the count in the EXIF of a normal photo the way Nikon does. The number lives in the camera. Someone has to ask the camera, over USB, with software that actually supports that model, or a Canon service center has to read it. Software support moves. A tool that worked on a 5D Mark III may shrug at a 5D Mark IV. If a command or an app returns nothing, write down “not read.” Do not write down zero, and do not let a seller’s “count is zero because the tool was blank” survive contact with this paragraph.

Some newer EOS R files do carry a count inside maker notes that certain tools have learned to read, including reports for bodies in the R5 and R6 family. Support is uneven across the original EOS R, the RP, and later models, and a tool’s homepage is a better source than a memory of what worked in 2021. The practical buying rule does not depend on which decoder is fashionable this month. Ask the seller for a reading from a named app that lists the exact model, plus the camera’s serial number in the same shot or the same report. When the body arrives, repeat the reading or take it to someone who can. A Canon service printout is the version that ends an argument.

GPhoto and similar command-line tools can read a shutter counter from some EOS bodies over USB. Whether yours is on that list depends on the body and on the software version. If the camera is not detected, stop. Forcing drivers and “just try this older firmware” is how people turn a used purchase into a different problem. The return window is a better tool than a forum thread.

What counts as high

Use a manufacturer rating when you have one, and do not invent one when you do not.

  • Canon rates the 5D Mark IV shutter at 150,000 cycles.
  • Nikon rates the D750 at 150,000 and the D850 at 200,000.
  • Fujifilm rates the X-T4 shutter at 300,000.

Those are engineering targets for the mechanism, tested in a way you will never reproduce. Cameras fail before them. Cameras run past them. A D850 at 190,000 that has had a calm life and a clean sensor can be a rational buy at the right price. A 5D Mark IV at 20,000 with a leaking grip and a spotted sensor is not a “like new” camera because the number is pretty.

For the Sony bodies, the Z5, the Z6 II, the 6D Mark II, the R6, the R5, and the RP, this guide does not print a cycle rating, because putting a remembered number next to them would be a guess. Compare two examples of the same model with each other, and compare the count with the cosmetics. A huge gap between a scuffed body and a tiny count is a question to ask, not a fact to celebrate.

What the number cannot see

The count does not show sensor scratches, oil, a replaced shutter that zeroed nothing, a swollen battery, a torn rubber, a bent mount, or a lens that was dropped on concrete and then put back in the kit. It does not show hours of video. It does not show that the camera was stored with the lens uncapped in a bathroom.

Read it anyway. A verified count is better than a story, and a story you cannot verify should not be the reason you pay the top of the asking range. When this site has a measured asking range on the product page, it still will not tell you the count of the copy you are about to buy. That part stays on you, on the original file, and on the first hour after the box arrives.